Other supplies that are helpful, to make the earring and necklace sets are:
- Scrap pieces of permanent vinyl (1.5 x 1.5 inch pcs)
- Diamond tipped reamer
- Two pair of bent nose pliers
- Scrap cardstock (6 x 6 inches and smaller)
- Tape or glue
- Vinyl weeding /transfer supplies
Tips for cutting small: Set speed to 1, make sure the blade is clean; vinyl is placed securely on cutting mat.
Remove the protective covering on the acrylic charms and then apply vinyl. Clear transfer tape makes this easiest since you can see through it.
Create professional and perfectly placed holes in the vinyl with a diamond tipped reamer or bead reamer. Insert into the hole and rotate to remove excess vinyl and leave a finished hole.
You don't need any special tools to make the earrings with the Double J earwires, which are included in the kit.
Slip the acrylic charm on the earwire, slide to the front until it is in position. Then push the ball towards the wire to ‘lock’ the acrylic piece into place.
For the necklace charm, using 2 pairs of bent needle nose or small needle nose pliers, open the oval split ring diagonally approximately 45 degrees. Load the chain and charm, then close using the reverse diagonal motion.
Jump Ring Tips: Give your jewelry a professional, secure connection by using an oval shape with the opening on a long edge in a heavy weight wire and by opening/closing the ring in the diagonal fashion shown in the tutorial.The Ampersand necklace pendant is now ready for the thin brown protective coating to be removed.
Now it’s time to print and cut the tags for the display card. If you're a Print and Cut beginner, don't skip Silhouette School's 101 tutorial.
Tips for successful print and cut: Color in your registration box and draw over the registration lines with a pen if your registration marks are not uber dark. Make sure to have plenty of light shining on/in the machine.After printing the file, delete, remove or use the 'No Cut' function for the verbiage. You only want a cut line around the border of the banner.
After cutting the patterned banner and heart card, use double-sided tape, glue stick or wet glue to assemble the three paper pieces.
Thread the necklace on the card and tape the bag in place on the back side of the card. Flip it over and you've got yourself an adorable little set! I love how it's a play on the best friend necklaces we shared with our friends growing up!
Share this post
- Tags: bacon and eggs, best friend jewelry, craft chameleon, fire and marshmallow, milk and cookie, movie and popcorn, peanut butter and jelly, perfect pairs, punch place plus, salt and pepper